Search
Latest topics
» Greetings Robert Didiana a Newbie Here!!by roob24 Sat May 12, 2012 4:53 am
» Rides & Styling
by 8thvision Mon Mar 12, 2012 12:06 pm
» Marlon Oakley Graphic Design
by 8thvision Thu Mar 08, 2012 12:28 pm
» Guest Book
by Guest Mon Feb 13, 2012 11:08 am
» This forum (promotions) is currently inactive
by 8thvision Thu Feb 09, 2012 10:04 am

How to install: LS400 / GS300 / GS400 Steering Column Gear (Installation Guide)
Page 1 of 1 • Share •
How to install: LS400 / GS300 / GS400 Steering Column Gear (Installation Guide)
This guide is for 89-94 Lexus LS400 GS300 and GS400 steering wheel motor Gear, please note. This guide will provide enough info for all trims but is not specifically suited for one, variation of the steps may be required.

Video:
First, make sure you have the Necessary tools for the job.
10MM Socket
Small Flathead screwdriver or Scrib
1.
Carefully Remove the Steering column cover, and cap (if installed) covering the motor.
2.
Using the 10mm socket loosen the bolt securing the damaged gear, remove bolt and washer (if present) with hand.
3.
Carefully Pry out the damaged gear by applying pressure to 4 opposing ends and pulling with the scrib or screwdriver, take
care not to damage the housing or motor.
4
Once damaged gear is removed test and Visually inspect the motor function, motor should turn freely.
5.
Insert New gear and lightly adjust the motor using the switch to make the gear sit correctly.
6.
Replace the bolt and washer, hand tighten the bolt and adjust the motor once more to be sure the gear is set correctly.
7.
Replace cap and cover in the reverse order they came off.

Video:
First, make sure you have the Necessary tools for the job.
10MM Socket
Small Flathead screwdriver or Scrib
1.
Carefully Remove the Steering column cover, and cap (if installed) covering the motor.
2.
Using the 10mm socket loosen the bolt securing the damaged gear, remove bolt and washer (if present) with hand.
3.
Carefully Pry out the damaged gear by applying pressure to 4 opposing ends and pulling with the scrib or screwdriver, take
care not to damage the housing or motor.
4
Once damaged gear is removed test and Visually inspect the motor function, motor should turn freely.
5.
Insert New gear and lightly adjust the motor using the switch to make the gear sit correctly.
6.
Replace the bolt and washer, hand tighten the bolt and adjust the motor once more to be sure the gear is set correctly.
7.
Replace cap and cover in the reverse order they came off.
Similar topics» Newspaper Column
» How to install Fonts in Samsung S3850 Corby 2
» Woodmere Installation Work Day
» Old Top Gear: Lancia Delta Integrale
» Wavesport Frankenstine and Gear for Sale.
» How to install Fonts in Samsung S3850 Corby 2
» Woodmere Installation Work Day
» Old Top Gear: Lancia Delta Integrale
» Wavesport Frankenstine and Gear for Sale.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum